
Direct answer: Yes. A TV and router together draw roughly 65–135 W, so a 500 Wh station runs them for 3–6 hours and a 1 kWh station for 6–12. Screen size is the main variable.
Editorial note: WhichWatts is an independent comparison site. Prices, availability, specifications, and retailer promotions change frequently. Check the live product table and retailer page before buying.
Can a Power Station Run a TV and Router During an Outage?
The TV and router are the appliances people miss first in a blackout, and the good news is that they are among the easiest loads to carry. A modern LED television draws 50–120 W, a router 5–15 W. Together they are a fraction of a kettle.
This guide gives the hours by screen size and capacity, and explains why the router deserves to be on a separate, smaller battery.
The short answer
Yes. A 55-inch LED TV plus a router draws around 115 W, so a 1 kWh station gives about 6.5 hours and a 2 kWh station about 13. A 500 Wh station covers three to six hours depending on screen size. If you only need internet and a small screen, a compact station will last days.
How much power does a TV and router use?
Television power scales with screen area and brightness. A 32-inch LED set is typically 30–50 W; a 55-inch set 80–120 W; a large OLED or bright LCD can reach 150–175 W. Routers are tiny by comparison.
| Device | Typical running draw | Notes |
|---|---|---|
| 32-inch LED TV | 30–50 W | Lowest common size |
| 43-inch LED TV | 50–80 W | Mid-size |
| 55-inch LED TV | 80–120 W | Most common living-room size |
| 65-inch OLED/LCD | 100–175 W | Brightness matters |
| Wi-Fi router | 5–15 W | Often the lowest load in the house |
| Soundbar | 20–50 W | Adds up during a film |
| Games console | 100–200 W | The biggest optional load |
ENERGY STAR notes that TVs must use 0.5 W or less in sleep mode; standby is not the problem, screen size is.
How long will a power station run a TV and router?
Using 100 W for a 55-inch TV plus router, and 135 W with a soundbar:
| Station size | Usable energy | Hours at 100 W | Hours at 135 W |
|---|---|---|---|
| 500 Wh | 383 Wh | 3.8 | 2.8 |
| 1,000 Wh | 765 Wh | 7.6 | 5.7 |
| 2,000 Wh | 1,530 Wh | 15 | 11 |
| 3,600 Wh | 2,754 Wh | 27 | 20 |
| 5,000 Wh | 3,825 Wh | 38 | 28 |
A 43-inch set at 60 W plus router gives roughly 6.4 hours on 500 Wh and 12.7 hours on 1 kWh.
The inverter requirements are modest
- Continuous output: 65–175 W is within reach of even compact stations.
- Pure sine wave: recommended for TVs, soundbars and consoles, whose power supplies can buzz or run hot on modified sine wave.
- Surge: negligible for TVs; consoles and soundbars have small startup draws.
- Router uptime: if the broadband cabinet loses power, the router alone will not restore internet. Mobile tethering is the fallback.
- Efficiency: a 12 V or USB-C-powered TV or router can avoid the inverter entirely and use less energy.
Which power stations suit a TV and router?
| Station | Capacity / continuous output | Hours with a 55-inch TV |
|---|---|---|
| Anker SOLIX C800 | 768 Wh / 1,200 W | About 6 hours |
| EcoFlow DELTA 2 | 1,024 Wh / 1,800 W | About 8 hours |
| Anker SOLIX C1000 | 1,056 Wh / 1,800 W | About 8 hours |
| Bluetti AC200L | 2,048 Wh / 2,400 W | About 15 hours |
| EcoFlow RIVER 2 Max | 512 Wh / 500 W | About 4 hours |
For an outage plan, a 500 Wh station dedicated to the router and a lamp will last several days; the TV is the discretionary load.
Stretching the hours
- Turn down the backlight. Brightness is a direct power cost on LED sets.
- Use the TV's eco mode. It usually caps peak brightness.
- Put the router on the smallest station. It draws 5–15 W and does not need a 2 kWh battery.
- Watch on a tablet. A 10–20 W tablet can replace a 100 W TV for news and streaming.
- Switch off standby. Small, but free.
FAQ
How long will a 500 Wh station run a TV?
About 3–6 hours for a 32–55-inch LED TV plus router, depending on brightness. A 55-inch set at 100 W gives roughly 3.8 hours.
Can I run a TV and router during a power cut?
Yes, and it is one of the most practical uses of a small station. Remember that the broadband cabinet may also be without power, so keep a mobile hotspot as backup.
Does a TV need a pure sine wave inverter?
It is strongly recommended. Modified sine wave can cause buzzing, heat and unreliable operation in TVs, soundbars and consoles.
How much do standby and consoles draw?
Standby is capped at 0.5 W for ENERGY STAR TVs, so it is negligible. A games console is the opposite: 100–200 W while gaming, which can halve the runtime figures above.
Amazon price checks: LED TVs · portable power stations. As an Amazon Associate, WhichWatts earns from qualifying purchases.
Sources
- ENERGY STAR: televisions
- National Energy Action: electricity consumption around the home
- US Department of Energy: estimating appliance energy use